The Bugs 3 Pro is a brushless motor, GPS enabled camera quadcopter and it comes with the C6000 full HD camera and 2 batteries.
Point of interest (circle me).
GPS Waypoint set and follow.
GPS/ Glonass enabled.
One key take off and land.
Max. flight time is around 22 minutes.
Powerful 1500KV brushless motors with ESC over current and over temperature protection.
First person (FPV) uses 5G wifi and has a maximum range of around 500m under ideal conditions.
The Bugs 3 pro comes with the full HD C6000 camera.
The camera gimbal can hold most types of action camera.
Control range is stated as 600 to 800m by manufacturer (but flight reviews on the internet are achieving in excess of 1000m).
Headless mode at the flick of a switch.
Bugs 3 Pro has three autonomous flight protocols:
Smart Return To Home
When the dedicated RTH button is pressed and the drone is connected to at least 7 satellites, the drone will automatically return to takeoff location.
You can still control your drone while it’s coming back to you in order to avoid any potential obstacles that might come in its way.
If you change your mind, you can always press RTH button again and the drone will exit RTH mode.
Failsafe Return To Home
If the drone loses transmitter connection for more than 6 seconds it will automatically turn on its failsafe protocol.
Once the connection has been restored, you can press the RTH button to take over full manual control.
Low voltage Return To Home
If your drone’s battery goes down to critical levels, low voltage return to home function will turn on.
This will guarantee your drone returns safely to its takeoff location.
There will also be a series of short beeps notifying you that your drone is running low on battery.
TRANSMITTER SCREEN OPTIONS:
RSSI – transmitter/receiver signal reception.
GPS – The number of obtained GPS satellite connections.
Distance – The distance between the transmitter and drone expressed in meters.
Altitude – The altitude between the takeoff and current drone’s position.
RxBat – Current drone battery level.
TxBat – Current transmitter battery level.
Headless – Headless mode on/off.
RTH – RHT mode on/off.
Calibration – Nofitying whether or not the compass calibration is ongoing.
IN THE BOX:
Spare propeller set
Your phone must be 5G wifi enabled to use the special features like FPV, follow me, circle me and waypoint flying.
Back To Top